Anonymous at Sat, 26 Jun 2021 01:47:38 UTC No. 835394

you don't need a full turnaround to make something, just start blocking out your shapes and continually rotate and evaluate your model, working from an orthographic reference can be a nice timesaver but you have to go off the script eventually to make it look right in 3d anyway.

Collect a bunch of screencaps of him at different angles from the cartoon and get sculpting.

Anonymous at Sat, 26 Jun 2021 03:43:34 UTC No. 835410

>>835370
Animate him getting destroyed by a horse cock

Anonymous at Sat, 26 Jun 2021 03:58:17 UTC No. 835412

"oh lo0k!!! Itss that funee deman frum Helubva Bosss!!!"

Anonymous at Sat, 26 Jun 2021 04:10:41 UTC No. 835416

>>835412
I hate that show so much

Anonymous at Sat, 26 Jun 2021 06:10:32 UTC No. 835431

OP, I just PM'd you the Raw Scans

Anonymous at Sat, 26 Jun 2021 07:18:10 UTC No. 835434

>>835370

They're pretty much just humanoids. If you are familiar with the features of the human body, you should be fine.

https://imgur.com/a/xOz1jDy

Anonymous at Sun, 27 Jun 2021 12:52:46 UTC No. 835585

>>835431
What's pm'd?

Anonymous at Sun, 27 Jun 2021 14:25:33 UTC No. 835602

>>835585
You have to be 18 or older to post here

Anonymous at Sun, 27 Jun 2021 19:52:23 UTC No. 835634

i modeled the head using >>835394
as reference it ended up with a Buzz Buzzard vibe.

Anonymous at Mon, 28 Jun 2021 11:56:21 UTC No. 835722

>>835431
How do you PM in 4chin?

Anonymous at Mon, 28 Jun 2021 12:19:35 UTC No. 835723

Op here, as someone who can't draw, I drew my own reference, did I get it right or do I need to fix the proportions?

Anonymous at Mon, 28 Jun 2021 12:40:46 UTC No. 835724

>>835634
Not too bad
>>835723
Just trace existing images that fit the bodytype and add the feet and head...

Anonymous at Mon, 28 Jun 2021 13:03:13 UTC No. 835728

>>835724
thats what I did

Anonymous at Mon, 28 Jun 2021 13:48:37 UTC No. 835739

>>835728
Well you did it wrong then.

Anonymous at Mon, 28 Jun 2021 13:50:08 UTC No. 835740

>>835739
whats wrong with it?

Anonymous at Mon, 28 Jun 2021 18:41:08 UTC No. 835777

thank you for reminding this character exists, grabbed a few more "art pieces" for my "anatomy reference" folder

Anonymous at Mon, 28 Jun 2021 21:20:15 UTC No. 835819

>>835739
>Well you did it wrong then.
elaborate

Anonymous at Thu, 1 Jul 2021 16:00:53 UTC No. 836408

OP here, this is what I got so far and Im stuck,

Anonymous at Thu, 1 Jul 2021 16:53:01 UTC No. 836411

>>836408
you're first mistake was using maya

Anonymous at Thu, 1 Jul 2021 17:16:47 UTC No. 836417

>>836411
Maya is what im required to learn

Anonymous at Thu, 1 Jul 2021 17:30:26 UTC No. 836419

>>836408
then just keep going. if you're learning 3d modelling, just brute force it. even if it looks like shit, you can go back and tweak it

Anonymous at Thu, 1 Jul 2021 18:06:48 UTC No. 836427

>>836408
sculpt then retopo

Anonymous at Thu, 1 Jul 2021 18:23:37 UTC No. 836430

>>836408
Why aren't you sculpting it.

Anonymous at Thu, 1 Jul 2021 19:44:29 UTC No. 836442

>>836430
>>836427
I thought thats what I was doing

Anonymous at Thu, 1 Jul 2021 19:48:17 UTC No. 836444

>>836408
everything else wrong with this aside, you'll save a lot of time if you only model half and apply the mirror modifyer. i assume maya has one of those

Anonymous at Wed, 7 Jul 2021 19:26:06 UTC No. 837528

When Im done Im going to make a vr chat avatar out of it.

Anonymous at Wed, 14 Jul 2021 22:23:23 UTC No. 838937

>>835370
had to take a break for a few weeks, here it is so far, I tried the hands and feet and they were a disaster, Is the rest of it ok so far?

Anonymous at Thu, 15 Jul 2021 02:18:38 UTC No. 838999

>>838937

Anonymous at Thu, 15 Jul 2021 03:04:46 UTC No. 839010

added mirror plane to be more clear

Anonymous at Thu, 15 Jul 2021 03:16:28 UTC No. 839013

>>838937
>Maya
Good to see a real software here once in a while.

Anonymous at Thu, 15 Jul 2021 20:43:55 UTC No. 839171

>>839010
I'm an aposlute noob, your going to have to explain that one to me

Anonymous at Fri, 16 Jul 2021 04:34:49 UTC No. 839228

>>839171

Anonymous at Sat, 17 Jul 2021 19:56:15 UTC No. 839522

>>839228

as I understand it:

1: make cube,
2: extrude bottom and left and right.
3: translate edges (i think)
4: more extrude
5: even more extrude.
6: I m lost here, do I simply extrude in the way you have shown in the top middle pick, will that turn into top right pic?
(also edge loop)
7: I don't know if I want a slouch, my drawing was more of a guideline.

Anonymous at Sun, 18 Jul 2021 01:40:31 UTC No. 839575

how long have you been using maya? this is your first character?

Anonymous at Sun, 18 Jul 2021 03:05:51 UTC No. 839589

>>839522
6: extrude the selected faces shown in top right.
in the middle is the result and i marked green where the arms will come off and pink where the neck will come off to help have an idea where the points will be translated.
last go to modeling toolkit select connect and click on one of the more stretched edges in the middle of the torso and press enter to add an edge loop.

Anonymous at Sun, 18 Jul 2021 12:14:22 UTC No. 839634

>>839575
This is my first charactr

Anonymous at Sun, 18 Jul 2021 20:45:14 UTC No. 839679

>>839228
Do people still use this technique for anthropogenic characters?
Are they desperate hipsters or are they purposely wasting their own time as a form of penitence or something?

Anonymous at Sun, 18 Jul 2021 21:33:58 UTC No. 839687

this guy >>839679 is a homosexual don't listen to him

Anonymous at Sun, 18 Jul 2021 21:47:14 UTC No. 839688

>>839228
I don't understand step 3

Anonymous at Sun, 18 Jul 2021 22:41:00 UTC No. 839695

>>839589
to be sure,
top left: select faces on both sides.

top middle: extrude function and adjust thickness to 0.2

I don't know how to get it to look like the top right, If I go up on the y axis like shown it goes all over the place.

(thanks for been patient with me)

Anonymous at Sun, 18 Jul 2021 23:24:51 UTC No. 839697

>>839679
What advanced technique do you use then, mr. 400 IQ? Can i see your glorious work?

Anonymous at Mon, 19 Jul 2021 00:43:39 UTC No. 839703

>>839695
is the symmetry on? first thing you have to do is turn the symmetry on.
if the symmetry is on everything you do to one side will be mirrored to the other side.

you selected the exact faces that is in the top left image

extrude those faces, the thickness does not matter, just add a little so the points is not on top of each other.

then select the points and move them into place like top right image.

Anonymous at Mon, 19 Jul 2021 00:50:42 UTC No. 839705

Hope it comes out well. There are a few other models of him out there. I tried to make my own a while back.

Anonymous at Mon, 19 Jul 2021 00:52:40 UTC No. 839706

>>839705
brap

Anonymous at Mon, 19 Jul 2021 04:03:30 UTC No. 839727

>>839697
Sculpting starting from a basemesh then retopo.

Sorry, bro. If you couldn't even figure that one out then you're ngmi.

Anonymous at Mon, 19 Jul 2021 04:06:43 UTC No. 839729

>>839705
why does he have a fat rump

Anonymous at Mon, 19 Jul 2021 04:11:58 UTC No. 839731

>>839705
I see what you did

Anonymous at Mon, 19 Jul 2021 11:58:47 UTC No. 839782

>>839703
by points you mean vertex? also step 3 is giving me trouble.

Anonymous at Mon, 19 Jul 2021 12:44:27 UTC No. 839784

>>839705
Where is his fat uncut cock like I see in all the fan art?

Anonymous at Mon, 19 Jul 2021 17:45:21 UTC No. 839829

>>839782
>by points you mean vertex?
yes

steps 3 is like you said here >>839522
translate points and make that shape around his pelvis, like his undies

Anonymous at Thu, 22 Jul 2021 19:39:48 UTC No. 840516

>>839228
>>839703
>>839829
I don't know if I did it right. (1/2)

Anonymous at Thu, 22 Jul 2021 19:41:19 UTC No. 840517

>>840516
.... heres how it looks, I didn't add the edge loop aroung the belly yet.

Anonymous at Thu, 22 Jul 2021 21:01:07 UTC No. 840529

>>839013
Ironic that the work itself is trash

Anonymous at Fri, 23 Jul 2021 07:40:02 UTC No. 840584

>>840517
nice
to add edge loops you can press CTRL+SHIFT+X to activate multi-cut tool and with CTRL pressed click to add loops.

after extrude you can use the sculpting tools to move vertices faster with the grab tool and after moving vertices you find that the points are jagged use the relax tool.

when you're modeling the SHIFT+right click menu is very useful you can find the circularize components there, make a selection and then press SHIFT+right click.

Anonymous at Fri, 23 Jul 2021 12:12:34 UTC No. 840604

>>840516
>>840517

Use blender instead, it's becoming the industry standard at an alarming rate. Maya is pretty much obsolete by now.

Anonymous at Fri, 23 Jul 2021 16:46:43 UTC No. 840625

>>840604
I started something and Im not going to stop till I finish it.

Anonymous at Sat, 24 Jul 2021 20:55:43 UTC No. 840804

>>839228
Made it to step 10. thanks for the help btw you are incredible, I feel like I fucked up the legs though.
any advice for going forward?

Anonymous at Sat, 24 Jul 2021 20:58:33 UTC No. 840805

>>840804
here are the legs

Anonymous at Sun, 25 Jul 2021 19:55:58 UTC No. 840941

>>840804
move the points to follow the contour of the torso leaving no complete flat areas, like it is on the sides. see images like the torso looks from the side and fix it where you see fit.

the legs looks ok, needs to fix the shape only.

Anonymous at Sun, 25 Jul 2021 20:00:20 UTC No. 840942

>>840941
why the concave chest and slouched shoulders?

Anonymous at Sun, 25 Jul 2021 20:13:10 UTC No. 840947

>>840942
i like it and i think when the wings are done will look better.

Anonymous at Sun, 25 Jul 2021 20:14:35 UTC No. 840948

>>840947
idk man, I like my boys THICC

Anonymous at Sun, 25 Jul 2021 20:22:39 UTC No. 840949

>>840948
ok fag

Anonymous at Sun, 25 Jul 2021 21:07:45 UTC No. 840958

>>840941
>>840941
Can I do It without the slouch?

Anonymous at Sun, 25 Jul 2021 21:58:45 UTC No. 840967

>>840941
it took you 24 days and its not even entirely blocked out

Anonymous at Sun, 25 Jul 2021 23:59:02 UTC No. 840986

>>840967
i just finish extruding the arms and legs today because OP still doing it. you see theres nothing complex in it (You) could do it in minutes.
ill just leave the file here even though i see OP is a degenerate flurry faggot ill share the little i know about 3d modeling with it.

Anonymous at Mon, 26 Jul 2021 10:04:52 UTC No. 841027

>>840986
>even though i see OP is a degenerate flurry faggot

What gave you that idea?

Anonymous at Mon, 26 Jul 2021 16:22:44 UTC No. 841065

>>840986
thought you were the OP

Anonymous at Mon, 26 Jul 2021 20:02:55 UTC No. 841099

Hey, I figure I'll drop some official model sheets just to be nice.

Anonymous at Mon, 26 Jul 2021 20:04:04 UTC No. 841100

Anonymous at Mon, 26 Jul 2021 21:24:40 UTC No. 841120

>>841099
>>841100
the dubses of wisdom. always use references or you end up with something that has nothing to do with the subject like pic related.

Anonymous at Wed, 28 Jul 2021 05:13:54 UTC No. 841330

Anonymous at Thu, 5 Aug 2021 20:10:40 UTC No. 842798

>>841120
>>841330
Whats wrong with these?

Anonymous at Tue, 10 Aug 2021 20:22:09 UTC No. 843519

Op here, its been a while since I was working on this because my aunt died and I was very busy with work, anyway this is my attempt at the arms, I know I fucked up the forearm and the thumb is an embarrassment. any pointers to improve because the background T-pose isn't working

Anonymous at Wed, 11 Aug 2021 06:34:46 UTC No. 843571

>>843519

Anonymous at Wed, 11 Aug 2021 06:42:54 UTC No. 843572

>>843519
the topology is the same you shape the way you want it.

Anonymous at Wed, 11 Aug 2021 07:57:09 UTC No. 843576

>>843519
>>843571
>>843572
Gargoyles have four fingers

Anonymous at Wed, 11 Aug 2021 08:11:58 UTC No. 843577

>>841330
3D is great!

Anonymous at Mon, 16 Aug 2021 02:58:09 UTC No. 844452

>>839705
Did you make this model? It's incredible. Is it available for download by any chance?

Anonymous at Mon, 23 Aug 2021 11:58:38 UTC No. 845985

Im still on this, just very busy with other stuff

Anonymous at Mon, 23 Aug 2021 12:47:00 UTC No. 845995

>>845985
I believe in you, op!

Anonymous at Mon, 23 Aug 2021 16:51:53 UTC No. 846035

>>845995
Thanks, what im has me caught up atm is a college project to design an OC video-game character with an attack animation and environment. Flotsam the armadillo pirate,

Anonymous at Mon, 23 Aug 2021 19:45:18 UTC No. 846065

>>846035
Give him one normal arm so he can still manipulate ropes and the like normally.
Hard to be a rope swingin' swashbucklin' pirate with both arms missing.
Or I guess you could make really quick at wrapping them around an arm, and make lever usage involve hacking off the end to turn it so that not being able to reuse them makes sense.

Anonymous at Tue, 24 Aug 2021 02:35:12 UTC No. 846143

>>840604
As a fellow blendlet myself, I recommend that OP keep using the software that he already is learning. It's not good practice to swap to another software while you're in the middle of learning the basics.

Anonymous at Tue, 24 Aug 2021 03:12:06 UTC No. 846144

>>846035
Someone's been playing too much Crash.

Anonymous at Tue, 24 Aug 2021 05:37:20 UTC No. 846159

>>846035
SOUL

Anonymous at Tue, 24 Aug 2021 14:05:20 UTC No. 846212

>>846035
>>846159
Yeah, basically he explores a treasure Island and can turn into a ball to roll around, but its more like metroid prime than sonic, a bit of prince of persia thrown in there as well.

Anonymous at Tue, 24 Aug 2021 17:57:38 UTC No. 846252

Actually can we take a break from brooklyn for a sec and focus on this guy, I don't know If I should attach the ball that will be his head to his body. (and i don't know how)

Anonymous at Tue, 24 Aug 2021 17:58:41 UTC No. 846255

>>846252
heres what I did so far

Anonymous at Wed, 25 Aug 2021 14:22:37 UTC No. 846422

geting places I just need help on opening the mouth, refining the snout and creating the eyes and brows.

Anonymous at Wed, 25 Aug 2021 17:24:28 UTC No. 846473

>>846255
those fucking retarded white bars is the reason why i am still on windows 7 (seven)

Anonymous at Wed, 25 Aug 2021 19:15:23 UTC No. 846491

progress for flotsam, just don't know how to apporach the arms and mouth, hes a special case

Anonymous at Wed, 25 Aug 2021 19:20:45 UTC No. 846492

>>836411
Quiet, Blendturd

Anonymous at Wed, 25 Aug 2021 19:25:14 UTC No. 846493

>>846491
here are the two reference sheets

Anonymous at Wed, 25 Aug 2021 19:26:19 UTC No. 846494

>>846493

Anonymous at Wed, 25 Aug 2021 19:28:42 UTC No. 846496

heres my attempt so far at the arms, I don't know whetherr to indent them more into the armadillo shell and and belly

Anonymous at Wed, 25 Aug 2021 19:29:44 UTC No. 846497

>>846496

Anonymous at Fri, 27 Aug 2021 23:18:00 UTC No. 847002

Whichh is a better tail for a t-pose? this .....

Anonymous at Fri, 27 Aug 2021 23:19:02 UTC No. 847003

or this?

Anonymous at Sat, 28 Aug 2021 22:12:23 UTC No. 847194

>>846035
here he is done, hes not supposed to be this dark, but I don't know how colours work on Maya, now back to work on brooky

Anonymous at Sat, 28 Aug 2021 22:13:25 UTC No. 847195

>>847194
>here he is done, hes not supposed to be this dark, but I don't know how colours work on Maya, now back to work on brooky
forgot image

Anonymous at Tue, 7 Sep 2021 22:58:00 UTC No. 849265

OP here, I haven't given up yet, will post more tomorrow.

Anonymous at Wed, 8 Sep 2021 03:07:45 UTC No. 849290

>>849265
as someone who has given up, you hold onto that. keep going

Anonymous at Mon, 13 Sep 2021 20:54:23 UTC No. 850522

how much will hentai benefit as referance images?

Anonymous at Wed, 15 Sep 2021 07:21:30 UTC No. 850956

>>850522
Use reference images, it's best to not be wildly off-model when it comes to porn.

Anonymous at Thu, 23 Sep 2021 03:57:07 UTC No. 852492

>>847195
Remembered this thread existed just because i plan to make an armadillo character after i finish my other one. I hope i don't fail catastrophically, also have you finished yours OP?

Anonymous at Thu, 23 Sep 2021 10:33:43 UTC No. 852558

>>852492
Not yet, i got covid

Anonymous at Wed, 29 Sep 2021 00:08:30 UTC No. 853756

Would you say je has a snout or a beak?

Anonymous at Wed, 29 Sep 2021 23:28:03 UTC No. 853944

>>853756
surely only birds have beaks so snout right?

Anonymous at Thu, 30 Sep 2021 03:55:19 UTC No. 853977

>>852558
get better soon, anon

Anonymous at Wed, 6 Oct 2021 00:51:31 UTC No. 855169

>>853977
Im sorry i have to keep bumping this thread, i want to get it done but im very busy

Anonymous at Sun, 17 Oct 2021 17:27:49 UTC No. 857021

OP here, Im back putting 100% i've made and attempt at the leg

Anonymous at Sun, 17 Oct 2021 17:39:43 UTC No. 857022

yiff in hell furfaggots

Anonymous at Thu, 28 Oct 2021 22:04:23 UTC No. 858907

>>835370
OP here, sorry for the hiatus, its been four months since I started this thread but Im determined to finish it..............

Anonymous at Thu, 28 Oct 2021 22:05:26 UTC No. 858908

>>858907
...................this is what I have so far, would you be able to give feedback before I go into texturing?

Anonymous at Thu, 4 Nov 2021 20:18:14 UTC No. 860073

Anonymous at Thu, 4 Nov 2021 20:33:40 UTC No. 860077

>>860073
his eyes are too close together, anyone know any quick fixes?

Anonymous at Wed, 17 Nov 2021 20:52:12 UTC No. 862749

how many faces are too many faces?

Anonymous at Wed, 24 Nov 2021 19:50:26 UTC No. 864444

are these shorts too short. I don't want to make a /trash/ model

Anonymous at Wed, 24 Nov 2021 19:51:28 UTC No. 864445

>>864444
>are these shorts too short. I don't want to make a /trash/ model

forgot pic

Anonymous at Thu, 2 Dec 2021 18:58:17 UTC No. 866479

Last step with the modeling, I just need to figure out how to do the eyes

Anonymous at Thu, 2 Dec 2021 18:59:18 UTC No. 866480

>>866479

Anonymous at Thu, 2 Dec 2021 19:08:41 UTC No. 866484

>>866480
Its been five months and a half and you're still not done with this.

Anonymous at Thu, 2 Dec 2021 20:02:37 UTC No. 866506

>>866484
but im close, its my first project. I also had life in the way

Anonymous at Sat, 11 Dec 2021 07:06:32 UTC No. 868877

Where are the updates, OP...

Anonymous at Tue, 14 Dec 2021 23:19:57 UTC No. 869819

>>868877
Im stuck with the eyes

Anonymous at Wed, 22 Dec 2021 21:05:12 UTC No. 871510

will be done by the new year

Anonymous at Thu, 23 Dec 2021 02:56:12 UTC No. 871545

Just do squishy spheres for the eyes

Anonymous at Sat, 25 Dec 2021 08:19:34 UTC No. 872002

>>839705
Good lord... is that Kim Kardashian?

Anonymous at Sat, 25 Dec 2021 16:42:11 UTC No. 872048

>>839705
mother bearing hips

Anonymous at Sun, 26 Dec 2021 00:49:25 UTC No. 872117

>>839705
He's literally ready to take a sausage up his waste chute

Anonymous at Sun, 26 Dec 2021 06:38:25 UTC No. 872157

>>871510
Well if you aren't that's ok too, just keep us updated in general. Good work so far anon.

>>841099
>>841100
That was very kind of you.

Your fortune: Your heart is two sizes too small.