🧵 Necklace Design. Can someone do tis in 3D ?
Nomnomnomingonananonanon at Sun, 5 Feb 2023 21:22:07 UTC No. 936057
Yes, indeed there are as many settings as there are shapes. Pavé and channel are what work best for a single row of diamonds, on a base that does not take up that much space. All eventualities, the base alloy needs the strength to hold the diamonds. This is a design; for a necklace; that uses white gold, consisting of gold, platinum and silver. Perhaps, these three elements could be melted together easily and used for jewelry? Indeed, not. It is a complicated process, of yet, unnamed and little known, however results can be achieved which fully satisfy the jeweler's need. Mind you, some benefit from this comes in the form of a higher heat hardening effect. The wire is drawn and wrapped in these 3 shapes: *drawing1 The rings are arranged into a chain. Two larger round ones, followed by one oval and one smaller. *drawing2 Tin, and only tin, is used in place of solder. It is called, eutectic bonding. The touching surfaces of the jump rings are dipped with molten tin. And into the oven at high temperatures for long hours. Gold and tin are eutectic, melting at lower temperatures, allowing diffusion, thus closing the rings. The necklace envisioned in this design, should be kept as small as possible. To each his own.
Anonymous at Sun, 5 Feb 2023 22:49:04 UTC No. 936068
>>936057
u are mentally ill
Nomnomnomingonananonanon at Mon, 6 Feb 2023 01:51:45 UTC No. 936082
>>936068
Irrelevant to the thread. Remove/delete.
Nomnomnomingonananonanon at Mon, 6 Feb 2023 03:18:31 UTC No. 936091
>>936089
Brother. What does that even mean? Besides I can tell without open it your stl file is trash...
Nomnomnomingonananonanon at Mon, 6 Feb 2023 03:19:32 UTC No. 936093
>>936089
complete trash
the chair nerd at Mon, 6 Feb 2023 03:22:42 UTC No. 936095
>>936093
Well I think your drawings are beautiful and you are a beautiful person. An illiterate one. But beautiful.
Nomnomnomingonananonanon at Mon, 6 Feb 2023 03:33:42 UTC No. 936096
>>936095
Yeah... But I am talking traash
Nomnomnomingonananonanon at Mon, 6 Feb 2023 03:54:29 UTC No. 936100
C,mon where my gds at?
Anonymous at Mon, 6 Feb 2023 04:11:52 UTC No. 936102
>>936089
>>936100
Chair anon was clear post tour arm anon, deliver.
Nomnomnomingonananonanon at Mon, 6 Feb 2023 04:36:12 UTC No. 936105
>>936102
I have to say it. Yall dumber than heck.